↑↓ move↵ openesc close
 Skip to content
Get a quote
Sealfinder Edge Trims

Edge Trims

An edge trim is typically used for to cover an edge of fiberglass, steel or some other material in order to increase safety or aesthetics. They can be made from rubber or plastic and most of the time will have a steel or wire core to increase the ability for it to clamp onto the flange.

Show me around Read the guide →
Using the Sealfinder Open full page ↗

Loading the guide…
72
profiles matching · CSV

Have a competitor's part number? Type it in — your closest Uni-Grip match comes up first.

Grid List
SORT
Part Width Height Material Mount Style
Edge Trims Remove filter Reset all
  1. Cross-section of 1420495000 0.230"5.8 mm 0.060"1.5 mm 1420495000 1420495000 + QUOTE ⇄
  2. Cross-section of 22-Orange 0.280"7.1 mm 0.340"8.6 mm 22-Orange 22-Orange + QUOTE ⇄
  3. Cross-section of 321583 0.340"8.6 mm 0.285"7.2 mm 321583 321583 + QUOTE ⇄
  4. Cross-section of 56684 0.340"8.6 mm 0.285"7.2 mm 56684 56684 + QUOTE ⇄
  5. Cross-section of 56690 0.285"7.2 mm 0.340"8.6 mm 56690 56690 + QUOTE ⇄
  6. Cross-section of 56807 0.187"4.7 mm 0.240"6.1 mm 56807 56807 + QUOTE ⇄
  7. Cross-section of 80170 0.240"6.1 mm 0.187"4.7 mm 80170 80170 + QUOTE ⇄
  8. Cross-section of BD-1185 0.350"8.9 mm 0.525"13.3 mm BD-1185 BD-1185 + QUOTE ⇄
  9. Cross-section of BD-1435 0.350"8.9 mm 0.660"16.8 mm BD-1435 BD-1435 + QUOTE ⇄
  10. Cross-section of BD-149 0.330"8.4 mm 0.570"14.5 mm BD-149 BD-149 + QUOTE ⇄
  11. Cross-section of BD-1550 0.710"18.0 mm 0.620"15.7 mm BD-1550 BD-1550 + QUOTE ⇄
  12. Cross-section of C1003 0.375"9.5 mm 1.000"25.4 mm C1003 C1003 + QUOTE ⇄
  13. Cross-section of DD-007 0.737"18.7 mm 0.291"7.4 mm DD-007 DD-007 + QUOTE ⇄
  14. Cross-section of DD-021 0.417"10.6 mm 0.173"4.4 mm DD-021 DD-021 + QUOTE ⇄
  15. Cross-section of ED-5361 0.370"9.4 mm 0.570"14.5 mm ED-5361 ED-5361 + QUOTE ⇄
  16. Cross-section of ED-5363 0.430"10.9 mm 0.980"24.9 mm ED-5363 ED-5363 + QUOTE ⇄
  17. Cross-section of ED-5372-G 0.512"13.0 mm 0.750"19.0 mm ED-5372-G ED-5372-G + QUOTE ⇄
  18. Cross-section of ET-031 0.236"6.0 mm 0.236"6.0 mm ET-031 ET-031 + QUOTE ⇄
  19. Cross-section of ET-053 0.488"12.4 mm 1.180"30.0 mm ET-053 ET-053 + QUOTE ⇄
  20. Cross-section of ET-054 0.315"8.0 mm 0.551"14.0 mm ET-054 ET-054 + QUOTE ⇄
  21. Cross-section of ET-076 0.446"11.3 mm 0.650"16.5 mm ET-076 ET-076 + QUOTE ⇄
  22. Cross-section of ET-080 0.732"18.6 mm 0.618"15.7 mm ET-080 ET-080 + QUOTE ⇄
  23. Cross-section of RE-055 0.250"6.4 mm 0.500"12.7 mm RE-055 RE-055 + QUOTE ⇄
  24. Cross-section of RE-092 0.315"8.0 mm 0.827"21.0 mm RE-092 RE-092 + QUOTE ⇄
  25. Cross-section of RE-092-Gray 0.315"8.0 mm 0.827"21.0 mm RE-092-Gray RE-092 Gray + QUOTE ⇄
  26. Cross-section of RE-105 0.313"8.0 mm 0.500"12.7 mm RE-105 RE-105 + QUOTE ⇄
  27. Cross-section of RE-147 1.075"27.3 mm 1.300"33.0 mm RE-147 RE-147 + QUOTE ⇄
  28. Cross-section of SD-1130 0.260"6.6 mm 0.450"11.4 mm SD-1130 SD-1130 + QUOTE ⇄
  29. Cross-section of SD-1130-Herringbone 0.260"6.6 mm 0.450"11.4 mm SD-1130-Herringbone SD-1130 Herringbone + QUOTE ⇄
  30. Cross-section of SD-1130-W 0.260"6.6 mm 0.450"11.4 mm SD-1130-W SD-1130-W + QUOTE ⇄